Home » CBL Pro-V

Performing a Data Recovery with CBL Pro-V software

Doing a Data Recovery

Download: A step by step guide for performing a data recovery with Pro-V. This download has a more in-depth description of the following process.

When performing a data recovery with CBL Pro-V we recommend that you proceed as follows:

• Install CBL Pro-V on a healthy Windows machine without the drive attached you want to recover from. Make sure you have sufficient space on the “good drive” for storing the recovered data. You also can store the recovered data to a LAN if you have access to one.
• Shut down the computer and attach the drive you want to recover from (“bad drive”) as a 2nd drive. You might need to jumper it differently. Make sure it is recognized correctly by the BIOS when starting up the computer.
• Start CBL Pro-V and verify that HD128: is the “good drive” and HD129: is the “bad drive”. Perform Steps 1 to 3 of the recovery process for the “bad drive” HD129:. Please follow the instructions provided with each particular step.
• When Step 3 has completed and you are ready to copy the recovered files over to the “good drive”, you need to purchase a license key if you have not already done so. There is no need to quit CBL Pro-V for purchasing or entering the license key. Just enter the key and continue with copying the files. It is a good idea to start with the files you need most.
• After copying all desired files shut down the computer and remove the “bad drive”. Store the “bad drive“in a safe place.

It is recommended to build a brand new system now. Use components other than the “bad drive”. Install the operating system. Install the programs from their installation CD-ROMs. Finally import the recovered data to the new drive.

Verify you got back all the data you need. Do not recycle the “bad drive” before you are absolutely sure about this. It is a good idea to wait 4 weeks before re-using the “bad drive”. If the “bad drive” had any mechanical problems you definitely must not use it again.

If you notice any mechanical problems with the drive, such as bad sectors or unusual noise, you should stop the recovery and make a drive image first. When successfully created, you can recover from this drive image as you would recover from the original drive. A mechanically damaged drive can fail entirely every second. It must be your primary goal to pull all raw data off such a drive as fast as possible. Making an image also reduces the load on the drive because each sector is read only once. Professional data recovery companies always make an image of the drive before trying to retrieve any files.

If your drive has a physical problem and you’re unable to obtain a usable drive image, we’d recommend that you send us your hard drive for a free evaluation and we’ll discuss with you what data is recoverable and your options.

If you divert from the process described above, always make sure you:

• never install CBL Pro-V on the “bad drive”.
• never use the “bad drive” as the boot-up system drive (C:).
• do not have temporary files and folders use the “bad drive”.
• never copy the recovered files to the “bad drive”.
• make an image first if the “bad drive” has mechanical problems.